This guide is intended for use with the Grow and Make Soy Candle Making Kits

 

Welcome to your new hobby of soy candle making! Soy candles are at least 90% cleaner burning than their petroleum counterparts, and because they burn at a cooler temperature than paraffin, soy candles will generally burn 25-50% longer.
IMPORTANT: Wax has a flash point generally between 290-380 degrees and may burst into flames once it reaches that point. Always use a thermometer when melting wax, and be careful when handling the hot wax. Children should NOT be left unsupervised when making candles. growandmake.com assumes no responsibility for injury which may result from candle making.
Let’s get started!
MELTING THE WAX
Be sure you are using soy wax that is specific for votive candles – A different type of soy wax is used for container candles. Begin melting the wax in a pot on the stove – 2 oz of wax will make 1 votive candle. Clip the thermometer inside the pot you are melting the wax in, and keep a close eye on the temperature of the wax at all times. The temperature of the melted wax should be regulated around 170 degrees.
ADDING COLOR
Once your melted wax is at 170 degrees you can add your candle dye. One Flutter Dye™ per pound of wax will give you a medium shade candle, half a Flutter Dye™ will make your color lighter, and 2 Flutter Dyes™ will make your candle darker. Stir the color with the wax for a full two minutes so the color will bond with the wax.
ADDING FRAGRANCE
Be sure you are using fragrance oils designed specifically for candle making, such as the fragrance oils for sale on www.growandmake.com and included in some of our candle making kits. These fragrance oils are pure and very concentrated, and 1 oz is generally enough to scent 8 lbs of wax. Depending on the amount of wax you are melting, adjust the portion of fragrance oil you are using. Pour in the pre-measured amount of fragrance oil and stir slowly for two full minutes. This will allow the wax, fragrance oil and color to bond together.
GETTING READY TO POUR
After the color and fragrance have been added, let the wax cool to 150-155 degrees and stir frequently while cooling. Allowing the wax to cool before before pouring will help prevent the cracking, flaking and discoloration that is common with soy waxes. You will want to use a candle pour pot or pyrex pitcher to pour the wax into the votives. First warm your pour container and in the oven so the wax won’t harden on it. The votive molds should also be warmed slightly before pouring in the wax.
POURING THE CANDLES
Dip the warm pour pot or pitcher into the wax or pour the wax from the melting pot into the pour pot/pitcher. Now pour wax into the votives and fill to the top; pour as slowly as possible to avoid bubbles. After the candles have formed a thin film on the top (several minutes), insert the wicks, keeping them straight and centered.
Let your candles cool completely and trim down the wick if desired. Congratulations, you have made your own soy candles! Now that you are ready to make more, visit www.growandmake.com to purchase a Candle Resupply Kit and other candle making supplies.

 

Enjoy!