GeoBulb MR16 LED Bulb (warm white)

Overview: The new GeoBulb® MR16 will save you money and last a long time. This LED MR16 light bulbs uses just 3 watts of power and lasts up to 50,000 hours. The Geobulb® MR16 will save you energy and offer a good return on your investment. If you run a MR16 for 24 hours a day, seven days a week as found in some commercial installations it is possible to save about $200.00* over the retail and electrical cost a standard incandescent M16 bulb over five years.

*An incandescent or halogen bulb costs: 8736 hours in a year X 20 Watts X 5 (years) = 873,600 Watt hours (873.6 kWh) @ $.12 KW = $104.83 in electricity saving plus the cost of replacing four bulbs per year for five years (20 bulbs) @ $7.95 = $159.00 for a total cost of $263.83. Your savings will vary according to your local electricity costs. To find the cost in your area go to http://www.eia.doe.gov/cneaf/electricity/epm/table5_6_a.html.

The Geobulb® MR16 costs $49.95 and cost about $15.72 in electricity to run for five years for a total cost of $65.67. You could almost pay off the GeoBulb® in the first year, and you will then be putting money in your pocket as compared to running a halogen or incandescent bulb.

The new High Brightness, energy saving Geobulb® MR16 easily replaces conventional bulbs in indoor applications where a 20 Watt, 30 degree beam Halogen or incandescent bulb is used. New, high-quality materials, techniques and over a decade of white LED experience allow for a five-year limited warranty. You could be conserving precious resources and, for one of the first times, benefiting financially by changing a simple light bulb.

Many commercial and residential situations exist where small MR16 bulbs are the best option to display artwork and to set the right ambience. However, the vast majority of MR16 bulbs are hot Halogen or incandescent bulbs. Compact fluorescents do not factor into this small bulb market because of their inherent large size. The tiny size of an LED lends itself to small bulb applications like MR16 bulbs, allowing for compact, bright bulbs that consume very little electricity and generate little heat. The new GeoBulb® MR16 is a good choice to replace hot, energy guzzling 20-Watt MR16 bulbs. Up until recently, it was impossible to construct a High Brightness long lasting LED MR16 bulb. We have more experience building and testing LED light bulbs over a longer period of time than most companies.


Origins: Made in China